Ametek PLA-PLW Programming Manual Manual de usuario descargar pdf (Pagina 49)

Returned Parameters <NR1> integer value representing EOS code

SYSTem:CROSs:MODe:STATe

This command sets or queries the cross mode state.

Command Syntax SYSTem:CROSs:MODe:STATe <NR1>

Parameters <NR1> cross mode state

0 = Input Off

1 = Input Remain

Query Syntax SYSTem:CROSs:MODe:STATe?

Parameters None

Returned Parameters <NR1> integer value representing cross mode state

SYSTem:CROSs:RANGe:STATe

This command sets or queries the cross range state.

Command Syntax SYSTem:CROSs:RANGe:STATe <NR1>

Parameters <NR1> cross range state

0 = Input Off

1 = Input Remain

Query Syntax SYSTem:CROSs:RANGe:STATe?

Parameters None

Returned Parameters <NR1> integer value representing cross range state

SYSTem:EOS

This command sets or queries the value of the end-of-string(EOS) code for all interface (RS-232

interface, GPIB interface and Ethernet interface).

Command Syntax SYSTem:EOS <NR1>

Parameters <NR1> end-of-string(EOS) code

0 = NULL(no EOS)

1 = CR

2 = LF

3 = CR/LF

Query Syntax SYSTem:EOS?

Parameters None

Returned Parameters <NR1> integer value representing EOS code

SYSTem:ERRor?

This query returns the next error message response string from the remote programming error queue.

The queue is a FIFO (first-in, first-out) buffer that stores maximum 9 errors as they occur. As it is read,

each error is removed from the queue. When all errors have been read, the query returns “0,No

error”. Please refer to the following table for detailed error code, and error message.

Query Syntax SYSTem:ERRor?

Parameters None

Returned Parameters <CRD> Er

ror code

with actual error message

“SYSTem:ERRor?” returned code and error message table:

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 73 74

Sin comentarios

Ametek PLA-PLW Programming Manual Manual de usuario Pagina 49