Ametek PLA-PLW Programming Manual Manual de usuario descargar pdf (Pagina 15)

Returned Parameters <NR1>, Value: 0 to 255

Suffix None

*TRG

Immediate Trigger Command. This command which is essentially the same as the Group Execute

Trigger (<GET>), generates a trigger to the electronic load only if TRIG:SOUR is set to BUS.

Command Syntax *TRG

Parameters None

*TST?

Self Test Query. This query causes the electronic load to go through a limited self-test.

Query Syntax *TST?

Returned Parameters <NR1> 0 = test passed

Nonzero indicates a self-test failure.

Suffix None

*WAI

This command instructs the electronic load not to process any further commands until all pending

operations are completed. Pending operations are complete when:

All commands sent before *WAI have been executed. This includes overlapped

commands. Most commands are sequential and are completed before the next

command is executed. Overlapped commands are executed in parallel with other

commands. Commands that affect input voltage or state, relays, and trigger actions

are overlapped with subsequent commands sent to the electronic load. The *WAI

command prevents subsequent commands from being executed before any

overl

apped commands have been completed.

All triggered actions are completed and the trigger system returns to the Idle state.

Command Syntax *WAI

Parameters None

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 73 74

Sin comentarios

Ametek PLA-PLW Programming Manual Manual de usuario Pagina 15