
User Manual – Rev H California Instruments
Avionics Software
Voltage Switching Transients 1
Test Conditions 1-17, 390Hz
Voltage Switching Transients 1
Test Conditions 18-27, 390Hz
Voltage Switching Transients 1
Test Conditions 28-36, 390Hz
Voltage Switching Transients 1
Test Conditions 37-42, 390Hz
Voltage Switching Transients 1
Test Conditions 1-17, 620Hz
Voltage Switching Transients 1
Test Conditions 18-27, 620Hz
Voltage Switching Transients 1
Test Conditions 28-36, 620Hz
Voltage Switching Transients 1
Test Conditions 37-42, 620Hz
Voltage Switching Transients 2
Voltage Switching Transients 2
Voltage Switching Transients 2
Voltage Switching Transients 2
Voltage Switching Transients 2
Voltage Switching Transients 2
Voltage Switching Transients with Frequency
Change
Test requires physically removing line cables
Test not performed with software
8.4.1.2 Table TVF:
Steady State Voltage and Frequency
DO160 16.5.1.1.b, 620Hz and
390Hz
Surge to 160Vac max, Sag to 71Vac min
DO160 16.5.1.5.1.b, 620Hz and
390Hz
Vamp = 0.18V to 1.24V, Mrate = 1Hz to 200Hz
DO160 16.5.1.2, 620Hz and 390Hz
Requires Additional Equipment
Limits defined by Table A.5
Voltage Distortion - Endurance test with motor
Voltage Distortion - Endurance test without motor
Test requires multiple load cables
Test not performed with software
Slew from 390 to 620Hz, 100Hz/s up and down
Famp = 4.9 Hz to 0.2Hz, Mrate = 0.014Hz to
100Hz
DO160 16.5.1.3, 620Hz and 390Hz
Comentarios a estos manuales