Ametek ReFlex Mating Connnectors for Controller Manual de usuario descargar pdf (Pagina 3)

Technical Note

ReFlex Power™ Mating Connectors for Controller Module

Document No. W380269-01 Rev F • 1/26/2009

9250 Brown Deer Road, San Diego CA 92121 • Tel: 858-450-0085 • Fax: 858-458-0267 • email: sales@programmablepower.com • Web: www.programmablepower.com

3 of 3

Signal Types:

A. Bi-Directional Digital I/O. Signals internally pulled up to +5V DC. Externally to be pulled low, (< = 0.5 VDC) relative to the designated signal

return, (signal type C).

B. Internal relay contact that is connected to the return when asserted. Absolute maximum rating 2A @ 30 VDC, 0.5A @ 125 VAC. Minimum

10 mA DC or 10 μA AC current required.

C. Return for type A see above.

D. Connected to the metal enclosure of the module. The enclosure of the module is connected to the earth ground connection of the ReFlex Power™

power input.

E. Externally to be pulled up to +5V to +15V DC, relative to Return Type F. Limit sink current to ≤ 40 mA.

F. Return for Type E, Common mode range ≤ 60 Volts.

OPTIONAL INTERFACE CONNECTOR ACCESSORIES

• AMETEK P/N 5380509-01, 15-pin Loop-back Connector Assembly. Includes a jumper wire between Pins 1 and 9 to enable

the outputs on all AC/DC/Load modules in a system.

• AMETEK P/N 5380441-01, Controller Module, 9-ft. Unterminated Cable Assembly. Use when interfacing to an external

system.

• AMETEK P/N 5380441-03, Controller Module, Right Angle, 9-ft. Unterminated Cable Assembly. Use when interfacing to an

external system.

LAN CONNECTOR

Primary user interface to the ReFlex Power™ system via Ethernet connection

Type: RJ45, CAT 5 compatible

Protocol conforms to IEEE 802.3 Ethernet-based LANs

Mating connector: Amphenol Socapex P/N RJF6MN, AMETEK P/N 856-993-07

Wire size: Standard CAT 5e 10/100-Base-T cable

Maximum length: 10 meters (can be extended subject to the environment and cable type).

LAN CONNECTOR PINOUT

Pin Name Function Signal Level

1 TX+ Transmit data positive, twisted differential pair with TX- IEEE 802.3

2 TX- Transmit data negative, twisted differential pair with TX+ IEEE 802.3

3 RX+ Receive data positive, twisted differential pair with RX- IEEE 802.3

4 NA N/A

5 NA N/A

6 RX- Receive data negative, twisted differential pair with RX+ IEEE 802.3

7 NA N/A

8 NA N/A

1 2 3

Technical Note 1

Comentarios a estos manuales

Sin comentarios

Ametek ReFlex Mating Connnectors for Controller Manual de usuario Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Ametek ReFlex Mating Connnectors for Controller